Abstract

• The pulverized-coal combustion of corner-fired furnace is simulated by LES . • The influences of excess air ratio on coal combustion are investigated. • The flame characteristic and the dispersed burning particles are studied. • The NO x emissions generated at various atmospheres are compared. Large-eddy simulations (LES) were carried out to study the effects of burning atmosphere on the coal combustion process in a corner-fired furnace. The LES for the turbulent gas was coupled with the discrete phase model (DPM) for coal particles trajectories and the non-premixed mixture fraction probability density function (MF-PDF) combustion model for pulverized coal combustion . The coal combustion processes, including the flame characteristics, burning coal behaviors and NO x pollutant emissions, for different burning atmospheres are analyzed qualitatively and quantitatively. The heat and momentum transfer between burning coal and turbulent gas are greatly enhanced by the corner-fired flow. With a given particle size, the char particles present a similar distribution in the whole chamber. For a fuel-rich atmosphere, the concentration is obviously much higher and exhibits much higher spatial variability than the other two conditions. The coal combustion efficiency decreases in oxygen-rich and fuel-rich burning atmospheres, but the flame stability is more affected at the fuel-rich atmosphere by the lack of oxygen. NO pollutant is obviously reduced at the fuel-rich atmospheres, and the NO pollutant emissions are more affected by the reducing atmosphere than the low temperature. These findings may provide insight into strategies to design and monitor tangentially-fired pulverized coal boilers.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.