Abstract

The deposition pattern of elongated inertial fibers in a vertical downward turbulent channel flow is predicted using large eddy simulation and Lagrangian particle tracking. Three dominant fibers deposition mechanisms are observed, namely, diffusional deposition for small inertial fibers, free‐flight deposition for large inertial fibers, and the interception mechanism for very elongated fibers. The fibers are found to exhibit orientation anisotropy at impact, which is strongly dependent on the fiber elongation. An increase in the fiber elongation increases the wall capture efficiency by the interception mechanism. The diffusional deposition mechanism is shown to dominate for fibers with large residence time, , in the accumulation zone and small deposition velocities, , while the free‐flight mechanism governs deposition for fibers with small and large . This study describes how particles deposit on a surface and, ultimately for many practical applications, how such deposition may promote fouling. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1451–1465, 2017

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.