Abstract
This study deals with a large eddy simulation (LES) of the single-phase turbulent flow in a fully baffled mixed vessel stirred by a pitched six-blade impeller. The ANSYS FLUENT 15.7 commercial CFD programme was employed. The LES turbulent model is used with the dynamic Smagorinsky–Lilly model. The Werner–Wengle wall function is used to cope with the requirements of near the wall cell size of the LES model. The sliding mesh (SM) model was used for simulating the impeller movement. The results of the simulations are compared with experimental data obtained by previous LDA measurements of the radial profiles of the axial component of the ensemble averaged mean velocity in the impeller discharge flow. The volume flow rates and the flow rate criteria were calculated from these velocity profiles, and were compared with the flow rates determined from the horizontal vessel cross section from simulation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
