Abstract
Nitric oxide formation in gas turbine combustion depends on four key factors: flame stabilization, heat transfer, fuel–air mixing and combustion instability. The design of modern gas turbine burners requires delicate compromises between fuel efficiency, emissions of oxides of nitrogen (NOx) and combustion stability. Burner designs allowing substantial NOx reduction are often prone to combustion oscillations. These oscillations also change the NOx fields. Being able to predict not only the main species field in a burner but also the pollutant and the oscillation levels is now a major challenge for combustion modelling. This must include a realistic treatment of unsteady acoustic phenomena (which create instabilities) and also of heat transfer mechanisms (convection and radiation) which control NOx generation.In this work, large-eddy simulation (LES) is applied to a realistic gas turbine combustion chamber configuration where pure methane is injected through multiple holes in a cone-shaped burner. In addition to a non-reactive simulation, this article presents three reactive simulations and compares them to experimental results. The first reactive simulation neglects effects of cooling air on flame stabilization and heat losses by radiation and convection. The second reactive simulation shows how cooling air and heat transfer affect nitric oxide emissions. Finally, the third reactive simulation shows the effects of combustion instability on nitric oxide emissions. Additionally, the combustion instability is analysed in detail, including the evaluation of the terms in the acoustic energy equation and the identification of the mechanism driving the oscillation.Results confirm that LES of gas turbine combustion requires not only an accurate chemical scheme and realistic heat transfer models but also a proper description of the acoustics in order to predict nitric oxide emissions and pressure oscillation levels simultaneously.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have