Abstract
A numerical method for forced convective boiling in an annulus needs to be developed in order to elucidate the reason for nucleation enhancement by disturbance waves. We first developed a numerical strategy to model the development of disturbance waves in annular flows where the highly turbulent gas core flow drives the laminar liquid flow upwards using advanced CFD tool TransAT. In which, the interface tracking method (e.g. Level-set) combined with a scale-resolving turbulence simulation technique (Large Eddy Simulation) was employed to capture dominant turbulence and interfacial scales. Then, the disturbance wave phenomenon in a vertical steam-water annulus system was investigated and analyzed. The finding reported in the present work provides insight into the evolution of disturbance wave and its influence on the heat transfer in annular flow. The modeling results revealed that locally hot ‘spots’ occurred upstream of disturbance wave. These locally overheated zones could play key roles in activating the nucleation boiling sites. In addition, the inception criteria of disturbance wave were explored by adjusting the mass flux of saturated water. And it was found no disturbance waves occurred at liquid film Reynolds number lower than the critical value, 225.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.