Abstract
We propose a novel design of superconducting nanowire avalanche photodetectors (SNAPs), which combines the advantages of multistage avalanche SNAPs to lower the avalanche current $I_{AV}$ and that of series-SNAPs to reduce the reset time. As proof of principle, we fabricated 800 devices with large detection area (15 μm × 15 μm) and five different designs on a single silicon chip for comparison, which include standard SNSPDs, series-3-SNAPs, and our modified series-SNAPs with double-stage avalanche structure 2*2-SNAPs, 2*3-SNAPs, and 3*3-SNAPs. The former three types of the detectors demonstrate fully saturated device detection efficiencies of ∼20% while the latter two types are latching at larger bias currents. In addition, the $I_{AV}$ of 2*2-SNAPs is only 64% of the switching current $I_{SW}$ that is lower than series-3-SNAPs (74%) and well below that of 4-SNAPs (84%) reported elsewhere. We also measure that the exponential decay times of the detectors are proportional to $1/ n^{2}$ due to the lack of external choke inductors. In particular, the decay time of 3*3-SNAPs is only 0.89 ns compared to the standard SNSPDs’ 63.2 ns, showing the potential to attain GHz counting rates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have