Abstract
Large area compositional mapping (>6 mm 2) using a fast and automated system based on laser-induced plasma spectrometry is presented. The second harmonic of a flat top Nd:YAG laser beam was used to generate a microline plasma on the sample surface. The emitted light from the microline plasma was imaged onto the entrance slit of an imaging spectrograph and was detected by an intensified charge-coupled device to generate a spatially and spectrally resolved data set. Individual LIPS images, each measuring roughly 2500×2500 μm with spatial resolution of 50 μm between adjacent craters and 4.8 μm along the microline are presented. These large area maps were acquired in less than 1 min. Steel samples containing MnS and TiN inclusions were chosen as the most adequate for this study. The results are presented for the characterization of inclusionary material in stainless steel products in terms of morphology, distribution and abundance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.