Abstract
This study is focused on the design and fabrication of large-area (4.1x4.1 mm2 and 8.2x8.2 mm2), 8.1 kV 4H-SiC GTO Thyristors. The anode and gate fingers of Thyristors were designed with involute, cellular or hexagonal patterns. Forward blocking voltages as high as 8106 V and On-state voltage drop (Von) and differential specific on-resistance (Ron,sp) as low as 3.8 V and 6 mΩ-cm2 at 100 A/cm2 were measured on these devices. About 59% of 4.1 x4.1 mm2 and 29% of 8.2x8.2 mm2 Thyristors blocked voltages in excess of 6 kV. Detailed investigations revealed the impact of different anode/gate finger geometries on the device characteristics. Preliminary pulsed power characterization of the GTO Thyristors was also performed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
