Abstract
A coupled 2D mathematical modelling study of landslide dam failure and flood is presented, complementing our experimental investigation presented in the companion paper. The model is built upon the shallow water hydrodynamic equations. The governing equations are numerically solved using the total-variation-diminishing version of the second-order weighted-average-flux method along with the HLLC (Harten, Lax and van Leer with Contact wave restored) approximate Riemann solver. Two parameters related to bed-load sediment transport and critical slope stability are calibrated using the measured stage hydrographs from two runs of the flume experiments. The calibrated model is then applied to other independent runs of the experiments featuring different inflow discharges, dam geometry, dam composition and initial breach dimensions. It is found to be able to satisfactorily reproduce the measured stage hydrographs and the widening of initial breach. The experimental observation of the prime role of the inflow discharge and initial breach in dictating the dam failure process and flood is unequivocally resolved, along with the impacts of dam geometry as well the content of cohesive clay and gravel in the dam. Interestingly, the downstream peak discharge and stage of the flood are substantially reduced by initial breach, which clearly exemplifies its role in modulating the flooding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.