Abstract
Abstract Scale deposition is one of the most serious oil field problems that inflict water injection systems primarily when two incompatible waters are involved. Mixing of these waters could cause precipitation of CaSO4, BaSO4 and/or SrSO4. To generate reaction kinetics data, the rate of calcium sulphate deposition in porous rock was measured while flooding Berea core samples of uniform properties with supersaturated brine. The brine was formulated by mixing a Ca+2-rich solution with a SO4−2-rich solution at the core inlet. The rate of CaSO4 scale formation was estimated by monitoring the core effluent's Ca+2 ion concentration. Several parameters were varied including temperature, pressure, degree of brine super-saturation, and flooding velocity. The results indicated increased rate of CaSO4 precipitation at higher temperatures, higher flood velocities, and greater brine super-saturation, whereas pressure had a slight effect on CaSO4 deposition. The results were utilized to build a general reaction rate equation to predict CaSO4 deposition in Berea sandstone for a given temperature, brine super-saturation, and flooding velocity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.