Laboratory study of low-sulfide tailings covers with elevated water table to prevent acid mine drainage

Abstract

The use of monolayer covers combined with an elevated water table (EWT) is a promising reclamation method that relies on the low gas-diffusivity of water to limit oxygen ingress into potentially acid-generating tailings. A monolayer cover is installed over the sulfidic material and the water table level is controlled to maintain the tailings close to saturation. A protocol including laboratory columns was conducted to evaluate the sensitivity of the technique to parameters including cover thickness, water table level, and the presence of an anti-evaporation layer. Two types of desulfurized tailings were evaluated: silty tailings from Westwood mine and sandy tailings from Goldex mine. Data used to evaluate the covers performances included volumetric water content, suction, oxygen concentrations, and oxygen consumption. Results showed that both cover materials could be used to maintain the reactive tailings at a degree of saturation ≥90% when the EWT level was maintained at a maximum distance of 1 m below the tailings surface. The finer Westwood material showed a better capacity for limiting oxygen migration through the cover, with a maximum flux of 5.7 mol·m−2·year−1 measured near the cover base.