Abstract
Inadequate drainage of pavement structures has been identified as a primary cause of pavement distress. Hydraulic conductivity is the most important factor controlling drainage capability. Coarse grained materials have high values of hydraulic conductivity. ASTM and AASHTO standard test methods are limited for coarse materials used in pavement bases and subbases because of their high permeability and large particle sizes and the horizontal flow in the field conditions. A large scale horizontal permeameter and a testing procedure were developed and the range of hydraulic conductivities of six base and subbase specifications made up of three material types provided by the Ohio Department of Transportation were evaluated. A horizontal permeameter (305 X 305 X 457 mm) and a testing procedure were developed to reduce errors produced by sidewall leakage, partial saturation, measurement of small head differences, and interpretation of turbulent flow as laminar flow. Fifty-four samples were tested, including vari...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.