Abstract
Recently, spherical nanoparticles have been studied to enhance oil recovery (EOR) worldwide owing to their remarkable properties. However, there is a lack of studies of nanosheets on EOR. Here, the amphiphilic molybdenum disulfide nanosheets were synthesized through a straightforward hydrothermal method. The octadecyl amine (ODA) molecules were grafted onto the surfaces of molybdenum disulfide nanosheets due to the presence of defects on the MoS 2 nanosheets surfaces. The synthesized amphiphilic molybdenum disulfide nanosheets (ODA-MoS 2 nanosheets) are approximate 67 nm in width. The effects of ultralow concentration ODA-MoS 2 nanosheets on the dynamic wettability change of solid surfaces and emulsion stability were also studied and discussed. Besides, the laboratory displacement experiments were also carried out to reveal the adsorption rules and the oil displacement effects by using ultralow concentration ODA-MoS 2 nanosheets. Experimental results indicate that the oil-wet solid surface (a contact angle of 130°) can transform into the neutral-wet solid surface (a contact angle of 90°) within 120 h after 50 mg/L ODA-MoS 2 nanosheets treatment. In addition, micro-scale emulsions in size of 2 μm can be formed after the addition of ODA-MoS 2 nanosheets by adsorbing onto the oil-water interfaces. The desorption energy of a single ODA-MoS 2 nanosheet from the oil-water interface to the bulk phase is proposed. When the concentration of ODA-MoS 2 nanosheets is 50 mg/L, the emulsions are the most stable. Core flooding results demonstrate that the ultimate residue of ODA-MoS 2 nanosheets in porous media is less than 11%, and the highest increased oil recovery of around 16.26% (OOIP) is achieved. Finally, the production performance of ultralow concentration of ODA-MoS 2 nanofluid (50 mg/L) in the application of Daqing Oilfield is summarized and discussed. • A straightforward hydrothermal method is used to synthesize amphiphilic molybdenum disulfide nanosheets. • Amphiphilic MoS 2 can change the oil-wet solid surface into a neutral-wet solid surface and form micro-scale emulsions. • Core flooding experiments show excellent abilities in oil displacement efficiency (average 16.26%). • The applications of amphiphilic MoS 2 in Daqing oilfield have achieved excellent effects on oil production increase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.