Laboratory-scale seismic CPT calibration chamber tests on Fraser River sand

Abstract

Physical modeling of cone penetration testing (CPT) can be carried out under known stress, deformation, and density conditions using laboratory calibration chambers. This study presents the results of reduced-scale model CPTs (MCPT) on Fraser River sand using a calibration chamber that allows anisotropic consolidation of soil specimens, as well as the measurement of shear wave velocity (VS), using bender elements. In addition to VS, MCPT can also measure cone tip resistance (qc), sleeve friction (fs), and pore water pressure developed behind the cone tip (Δu2). The CPT model tests are performed on Fraser River sand at different effective stresses and relative densities. The CPT calibration chamber test results are comparable with those of in situ seismic cone penetration tests (SCPT) in the Fraser River delta, existing correlations between VS and qc, and calibration chamber tests on other sands. This confirms the overall feasibility of the MCPT calibration chamber design for the measurements of qc, fs, and VS in sandy soils.