Laboratory-scale inactivation of African swine fever virus and swine vesicular disease virus in pig slurry.

Abstract

Two methods were evaluated for the inactivation of African swine fever (ASV) and swine vesicular disease (SVD) viruses in pig slurry: chemical treatment and heat treatment. The addition of NaOH or Ca(OH)2 at different concentration/time combinations at 4 degrees C and 22 degrees C was examined, as was virus stability at different temperature/time combinations. ASF virus (ASFV) was less resistant to both methods than SVD virus (SVDV). In slurry from one source, ASFV was inactivated at 65 degrees C within 1 min, whereas SVDV required at least 2 min at 65 degrees C. However, it was found that thermal inactivation depended on the characteristics of the slurry used. Addition of 1% (w/v) of NaOH or Ca(OH)2 caused the inactivation of ASFV within 150 s at 4 degrees C; 0.5% (w/v) NaOH or Ca(OH)2 required 30 min for inactivation. NaOH or Ca(OH)2 (1% (w/v)) was not effective against SVDV at 22 degrees C after 30 min, and 1.5% (w/v) NaOH or Ca(OH)2 caused inactivation of SVDV at both 4 degrees C and 22 degrees C. At higher chemical concentrations or temperatures, ASFV and SVDV inactivation was faster in slurry than in buffered medium.