Abstract
This paper presents an investigation on the effects of flaky aggregates in asphalt mixture. In general, aggregate characteristics are critical to the performance of asphalt mixture. Therefore, flaky aggregate is normally avoided simply because it has significant contribution towards the gradation and reduces the interlocking characteristics of aggregates within asphalt mixture. In practice, it is recommended that the amount of flakiness aggregate should be limited to 25% or less. This study evaluates the mechanical properties of asphalt mixture specimens prepared with various percentages of flaky aggregates particularly 10%, 20% and 30% by the total weight of the mixture. Several laboratory tests were conducted including Marshall properties test, Indirect Tensile Modulus test and Dynamic Creep test. The results show that higher bitumen content is required with the increased in the amount of flaky aggregates added to mixture. Furthermore, greater amount of flaky aggregates tends to reduce the mixture’s resilient modulus and its resistance against permanent deformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.