Laboratory column study for remediation of MTBE-contaminated groundwater using a biological two-layer permeable barrier

Abstract

In this study, an in situ biological two-layer permeable reactive barrier system consisting of an oxygen-releasing material layer followed by a biodegradation layer was designed to evaluate the remediation effectiveness of MTBE-contaminated groundwater. The first layer containing calcium peroxide (CaO 2) and other inorganic salts is to provide oxygen and nutrients for the immobilized microbes in the second layer in order to keep them in aerobic condition and maintain their normal metabolism. Furthermore, inorganic salts such as potassium dihydrogen phosphate (KH 2PO 4) and ammonium sulphate ((NH 4) 2SO 4) can also decrease the high pH caused by the alkali salt degraded from CaO 2. The second layer using granular expanded perlite as microbial carrier is able to biodegrade MTBE entering the barrier system. Batch experiments were conducted to identify the appropriate components of oxygen-releasing materials and the optimum pH value for the biodegradation of MTBE. At pH=8.0, the biodegradation efficiency of MTBE is the maximum and approximately 48.9%. A laboratory-scale experiment using two continuous upflow stainless-steel columns was then performed to evaluate the feasibility of this designed system. The fist column was filled with oxygen-releasing materials at certain ratio by weight. The second column was filled with expanded perlite granules immobilizing MTBE-degrading microbial consortium. Simulated MTBE-contaminated groundwater, in which dissolved oxygen (DO) content was 0 mg/L, was pumped into this system at a flow rate of 500 mL/d. Samples from the second column were analyzed for MTBE and its major degradation byproduct. Results showed that MTBE could be removed, and its metabolic intermediate, tert-butyl alcohol (TBA), could also be further degraded in this passive system.