Abstract
Abstract Laboratory and field tests are reported for titanium parts for gas lift valves and down-hole oil well pumps. While titanium performed well in the laboratory tests using aerated fluids, and did well in field tests of gas lift wells, similar trials in wells pumping sour crude oil well showed titanium to be inferior to normally used materials. Authors conclude titanium is suitable for use in gas lift valves and could be competitive to presently used materials at a lower price. They conclude titanium is not suitable for use in oil well pumps, but might perform better if hardened. It also is at a competitive disadvantage to commonly used materials costwise. While titanium is cathodic to materials commonly used in oil wells, no marked corrosion was attributed to this property after exposure of coupon sets in a producing well. Titanium was found resistant to abrasion by sand-laden aerated oil well fluids in laboratory tests. 6.3.15, 8.4.3
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.