Abstract

Mixed rare-earth (La, Pr)0.8Sr0.2FeO3−δ–Sm0.2Ce0.8O2−δ (LPSF–SDC) composite cathode was investigated for proton-conducting solid oxide fuel cells based on protonic BaZr0.1Ce0.7Y0.2O3−δ (BZCY) electrolyte. The powders of La0.8−xPrxSr0.2FeO3−δ (x = 0, 0.2, 0.4, 0.6), Sm0.2Ce0.8O2−δ (SDC) and BaZr0.1Ce0.7Y0.2O3−δ (BZCY) were synthesized by a citric acid-nitrates self-propagating combustion method. The XRD results indicate that La0.8−xPrxSr0.2FeO3−δ samples calcined at 950 °C exhibit perovskite structure and there are no interactions between LPSF0.2 and SDC at 1100 °C. The average thermal expansion coefficient (TEC) of LPSF0.2–SDC, BZCY and NiO-BZCY is 12.50 × 10−6 K−1, 13.51 × 10−6 K−1 and 13.47 × 10−6 K−1, respectively, which can provide good thermal compatibility between electrodes and electrolyte. An anode-supported single cell of NiO-BZCY|BZCY|LPSF0.2–SDC was successfully fabricated and operated from 700 °C to 550 °C with humidified hydrogen (∼3% H2O) as fuel and the static air as oxidant. A high maximum power density of 488 mW cm−2, an open-circuit potential of 0.95 V, and a low electrode polarization resistance of 0.071 Ω cm2 were achieved at 700 °C. Preliminary results demonstrate that LPSF0.2–SDC composite is a promising cathode material for proton-conducting solid oxide fuel cells.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.