Abstract
Kraft green liquor (GL) mainly consisting of sodium carbonate and sodium sulfide are available from Kraft mills. Kraft GL combined with ethanol (Kraft GL-ethanol) was chosen to pretreat sugarcane bagasse for effective enzymatic hydrolysis. And the obtained lignins and cellulose rich fractions were characterized in detail. The highest lignin removal of 95.3% was observed at a pretreatment temperature of 160°C, and approximately 70.8% of lignin was removed at the pretreatment temperature of 100°C. The lignin removal with Kraft GL-ethanol pretreatment was higher than that with Soda GL-ethanol pretreatment at 140°C. An FT-IR study of the isolated lignins showed that an increase in pretreatment temperature resulted in the cleavage of ester bonds. GPC results revealed that the molecular weight decreased with increasing pretreatment temperature. The 2D HSQC NMR data showed that the cleavage of β-O-4 became more severe with increasing pretreatment temperature from 80 to 160°C. Fewer condensation reactions between lignin units occurred when the pretreatment temperature was above 100°C. Moreover, the enzymatic hydrolysis efficiency of sugarcane bagasse increasing with increasing pretreatment temperature. The glucose yield reached 65.13% at a pretreatment temperature of 80°C. The maximum glucose yield (98.26%) of sugarcane bagasse after 72h of enzymatic hydrolysis was achieved at a pretreatment temperature of 160°C. When lignin content was low in samples after pretreatment at 140–160°C, the enzymatic hydrolysis efficiency of the substrate increased because the number of crystalline cellulose regions decreased. Scanning electron microscopy showed that the surfaces of Kraft GL-ethanol pretreated sugarcane bagasse were separated into individual fibers. In addition, contact angle analysis showed that the Kraft GL-ethanol pretreated sugarcane bagasse was more hydrophilic than untreated sugarcane bagasse.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.