Kinetics of the vapour‐phase hydrogenation of benzene over a supported nickel catalyst in a stirred‐vessel reactor

Abstract

AbstractThe catalytic hydrogenation of benzene was investigated over a supported nickel catalyst in a continuous stirred‐vessel reactor between 260° and 450°F at atmospheric pressure. The effects of temperature, ratio of hydrogen to benzene and total feed rate (or contact time) on the conversion of benzene and yield of cyclohexane were determined.The use of the stirred reactor helped to eliminate mass transfer limitations. The investigation was carried out using surface‐coated catalysts in order to eliminate pore diffusion which might otherwise mask the actual kinetics.Studies of the mixing characteristics of the reactor were carried out under both reacting and non‐reacting conditions, by following conversion as a function of stirrer speed and by a tracer (pulse) technique, respectively.The kinetic data were analysed to determine the most probable model to represent the reaction. The Houghen–Watson type analysis was carried out using non‐linear least squares instead of the usual linear one. The model that satisfactorily correlated the data over the entire temperature range describes the rate‐controlling step as the surface reaction between adsorbed hydrogen and adsorbed benzene, the hydrogen addition being simultaneous. The following Hougen–Watson type equation was proposed: r = ke KH 3KB PH 3PB/(1+KHPH+KBPB+KCPC)4.The constants in this rate equation were expressed as a function of temperature.