Kinetics of short‐duration ethylene–propylene copolymerization with MgCl2‐supported Ziegler–Natta catalyst: Differentiation of active centers on the external and internal surfaces of the catalyst particles

Abstract

ABSTRACTEthylene–propylene copolymerization with a TiCl4/MgCl2 type ZN catalyst was conducted for different durations from 30 to 600 s, and changes of polymerization rate, concentration of active centers ([C*]) and copolymer chain structure with time were traced. The copolymerization rate decayed with time, but [C*]/[Ti] increased in the same period. This was attributed to release of more active sites through disintegration of catalyst particles by the growing polymer phase. Ethylene content of the copolymer quickly decreased in the period of 30–90 s, meaning that the active centers activated in the reaction process have stronger ability of incorporating propylene than those activated at the very beginning. The copolymer samples were fractionated into two parts, namely n‐heptane soluble fraction (random copolymer) and insoluble fraction (segmented copolymer with high ethylene content). With continuation of the copolymerization, active centers producing the random copolymer chains increased much faster than active centers producing the segmented copolymer chains, and became the dominant centers after 120 s. Consequently, proportion of the soluble fraction sharply increased with time. All these results indicate that the active centers located on the external surface of catalyst particles are highly different from those buried inside the particles. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46030.