KINETICS OF SCANDIUM SORPTION BY IMPREGNATE CONTAINING PHOSPHINOXIDE

Abstract

The kinetics of scandium sorption with impregnate-containing extractant – phosphine oxide based on hypercrosslinked polystyrene from nitric acid solutions was studied using a method of limited solution volume. A sample of sorbent obtained by impregnation contained 0.233 g extractant/g impregnate. Under batch conditions, the influence of temperature in the range 293-313 K on the kinetics of scandium sorption by impregnate was studied. It was revealed that the saturation of impregnate by scandium is established in 20-30 min. For the processing of integral kinetic scandium sorption curves, the pseudo-first and pseudo-second-order models, as well as the Elovich equation, were used. The values of the rate constants calculated from the pseudo-second-order model, describing the kinetic data with the best correlation coefficients (R2 0.931-0.995), reach (9.51-10.4) g∙(mmol∙min)-1. The activation energy of scandium sorption, calculated by an equation similar to the Arrhenius equation, is (2.8±0.2) kJ / mol. Due to the improved kinetic characteristics compared with traditional sorbents, hypercrosslinked polystyrene impregnates containing phosphine oxide can be used to extract of scandium from solutions formed during the processing of scandium-containing raw materials.Forcitation:Pyae Phyo Aung, Veselova O.A., Troshkina I.D. Kinetics of scandium sorption by impregnate containing phosphinoxide. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2017. V. 60. N 8. P. 28-30.