Abstract

This study seeks to assess the imbibition kinetics of low radioactive wastewater (from the DayaBay nuclear power plant) into a partially saturated ternary-binder mortar, as well as the sorption kinetics of 60Co and 137Cs from the water. Mortar samples with the initial saturation degrees of 0, 0.4, 0.6, 0.8 and 1.0 were prepared for the wastewater treatment. Pore structure of the mortar was characterized using water vapor sorption isotherm and mercury intrusion porosimetry tests interpreted by the Guggenheim-Anderson-de Boer isothermal equilibrium, and volume- and energy-based fractal models. Results show that the mortar has consistent fractal pore structure between the models, and the liquid imbibitions follow the fractal imbibition kinetics, in which the parameters are non-linearly impacted by the initial saturation degrees. The sorption rate and retention capacity of 137Cs are much lower than those of 60Co, and both follow the Brouers–Sotolongo fractional kinetics. The findings uncover the complex liquid imbibition and radionuclides sorption kinetics in cement-based porous materials, and the in-situ data would contribute to the material designs and sorption controls for large scale in-situ treatments of wastewater from nuclear power plant.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.