Abstract
Ilmenite separated from beach sands of Bangladesh was oxidized for 1 h at 950 °C and then reduced in charcoal for 4 h at 1050 °C. This was followed by leaching in 5% to 15% hydrochloric acid solution in temperature range of 30 to 75 °C for periods of up to 2 h. The results were compared with those obtained by leaching of ilmenite reduced without oxidizing. Oxidation prior to reduction of the ilmenite was found to increase both the extent and the rate of leaching. The residual iron contents after leaching were also found to be lower than that obtained for non-oxidized samples. The kinetic data of leaching of ilmenite reduced after oxidation was found to follow first order reaction model, i.e., G( α) = − ln(1 − α) up to an α value of 0.5 (i.e. up to 50% reduction) and then changed to spherical model, i.e., G( α) = [1 − (1 − α)] 3. On the other hand, leaching of ilmenite reduced without oxidizing was found to follow the Ginstling-Brounshtein reaction, i.e., G( α) = 1 − (2/3) α − (1 − α) 2/3 throughout the leaching process. Oxidation of ilmenite prior to reduction was also found to have decreased the activation energy of leaching from 43 kJ/mol, found for samples leached after reduction without oxidizing, to 30 kJ/mol.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.