Abstract
AbstractMethyl esters from crude sunflower oil were produced via methanolysis reaction using sodium hydroxide catalyst. Methanolysis was carried out at different agitation speeds (200–600 rpm), temperatures (25–60 °C), catalyst loadings (0.25–1.00% by weight of oil), and methanol:oil mole ratios (6:1–20:1). Mass‐transfer limitation was effectively minimized at agitation speeds of 400–600 rpm with no apparent lag period. Lowering the temperature resulted in a fall in the rate of reaction prolonging the reaction time necessary to achieve maximum production of methyl ester. Using 0.50% hydroxide catalyst was found to be adequate, resulting in 97–98% conversion without compromising recovery due to soap formation. Increasing the methanol:oil mole ratio beyond the usual amount of 6:1 tended to speed up the initial rate of methanolysis and was found to lower the bonded glycerol content, especially the amount of diglyceride in the sample. Kinetic rate constants were derived from experimental results using second‐order rate expressions, and values of activation energy for glyceride methanolysis have been established. Copyright © 2007 Society of Chemical Industry
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Chemical Technology & Biotechnology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
