Kinetics of group transfer polymerization of tert‐butyl methacrylate in tetrahydrofuran

Abstract

AbstractThe reaction kinetics for the group transfer polymerization (GTP) of tert‐butyl methacrylate (TBMA) using a silyl ketene acetal initiator and a nucleophilic catalyst are investigated. The reaction is shown to be of first order in both monomer and catalyst concentrations. The “livingness” of this system appears to be influenced by the reaction temperature. At temperatures above −20°C, deactivation is observed, with its severity increasing with increasing temperature. This deactivation is attributed to a depletion of catalyst by side reactions. It was demonstrated that reactivation is made possible by the addition of more catalyst. This result is in contrast to the anionic polymerization of TBMA, where no deactivation was observed even at ambient temperature. At temperatures below −20°C no deactivation is observed; however, at these temperatures, the reactions manifest induction periods with lengths increasing with decreasing temperature. The rate constants are lower than those for the GTP of methyl methacrylate (MMA) by a factor of 1,5 to 2. The following Arrhenius parameters were obtained for the propagation rate constants: activation energy, Ea = (19,1 ± 3) kJ/mol, preexponential factor, log10 A = (7,05 ± 0,3). These values are comparable with those obtained for MMA. The molecular weight distributions are similar to those obtained in the GTP of MMA, i.e. the ratio of weight‐to number‐average molecular weights is rather high for low monomer conversions and narrows to M̄w/M̄n ≥ 1,3 for full conversion. This is attributed to the rates of the catalyst exchange equilibrium.