Abstract
There have been many studies on the growth kinetics of titanium dioxide and doped titanium dioxide. However, most calculated the grain size after isothermal treatment and cooling to room temperature; thus, the real grain size of titanium dioxide at the real-time temperature during heat treatment could not be obtained. This study thus aimed to obtain accurate grain information during the heat treatment process. In this study, titanium oxysulfate (TiOSO4) and ferric chloride (FeCl3·6H2O) were used to hydrolyze and precipitate TiO2 precursors containing impurity iron. Then, the sample was subjected to high-temperature in situ x-ray diffraction. Using the Williamson–Hall mapping method to process the x-ray diffraction information, the grain size could be used to characterize changes in the grain size, and the change law of TiO2 during the heat treatment process was studied. Furthermore, the effect of Fe doping on the growth of TiO2 crystals was examined through the crystal growth kinetics. The results revealed that when the Fe doping amount reached a certain level, it affected the growth mechanism of the rutile type titanium dioxide grains, thereby causing a change in the growth order. Specifically, an increase in the Fe doping amount increased the growth activation energy; that is, it inhibited the growth of rutile-type titanium dioxide grains.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
