Kinetic effect of different ground conditions on the sole of the claws of standing and walking dairy cows

Abstract

For the first time, we analyzed the direct kinetic effects of concrete and rubber flooring on the soles of live dairy cows' claws while standing and walking. Ten adult dairy cows were equipped with foil-based pressure sensors (HoofSystem, Tekscan Inc., Boston, MA) under their left hind leg using a leather claw shoe. These sensors captured parameters of pressure distribution and vertical ground reaction forces while the cows walked on the 2 tested flooring types. The mean pressure was 15.1 to 21.1% lower on rubber flooring compared with concrete; mean pressure values (± standard deviation) were 36.32 ± 7.77 N/cm2 for static measures and 57.33 ± 11.77 N/cm2 for dynamic measures. We observed an even more obvious relief on rubber flooring in the maximum pressure loads, which were 30.1 to 32.7% lower on rubber flooring compared with concrete; mean pressure values (± standard deviation) were 98.79 ± 14.49 N/cm2 for static measures and 150.45 ± 20.87 N/cm2 for dynamic measures). The force-time curves of the dynamic measures essentially showed biphasic curve progression, with local peaks at 29 and 79% of the stance phase. However, we found considerable differences in curve progression between individuals and between the lateral and medial claws, which may be verified in further investigations with more animals. The study showed a noticeable reduction in mechanical load during standing and walking on rubber flooring compared with concrete.