Abstract
LiFe 0.9Mg 0.1PO 4 material was prepared by mechanical milling method, followed by heat treatment. The equilibrium potential-composition isotherm of LiFe 0.9Mg 0.1PO 4 and charge–discharge kinetics of LiFe 0.9Mg 0.1PO 4 were measured using galvanostatic intermittent titration technique (GITT), potential-step chronoamperometry (PSCA), and electrochemical impedance spectroscopy (EIS). The rate performance of the cathode is controlled by the charge-transfer kinetics, electronic conductivity, Li-ion diffusion capability, and phase transformation rate. Since LiFe 0.9Mg 0.1PO 4 has a fast charge-transfer reaction and high electronic and ionic diffusivity, the phase transformation between LiFe 0.9Mg 0.1PO 4 and Li 0.1Fe 0.9Mg 0.1PO 4 begins to play a more important role in the charge–discharge process, as is evident by an inductive loop induced by the phase transformation in the low frequency region of EIS. The phase purity and morphology of LiFe 0.9Mg 0.1PO 4 were also observed using X-ray diffraction (XRD) and scanning electron microscopy (SEM).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.