Abstract
The purpose of this study was to determine the response and performance of fly ash as an adsorbent activated by HCl and impregnated with FeCl3 to absorb phenol. In this study, the fly ash activation process was carried out using 8 M HCl for 2 hours and impregnated with 2% FeCl3 for 2 hours. Activated and impregnated fly ash was analyzed using a Scanning Electron Microscope-Energy Dispersive Spectrophotometer (SEM-EDX). The results of the activated and impregnated fly ash surface using SEM-EDX showed that there were changes in morphology and functional groups. Then activated and impregnated fly ash was used to absorb phenol at a time variation of 60 minutes, 120 minutes, 180 minutes, 240 minutes and 300 minutes. At 180 minutes of contact time, the equilibrium point is obtained with an absorption efficiency of 90.5%. Second-order pseudo kinetics were used for phenol adsorption by Fe+ impregnated fly ash (R2 = 0.9916). The isotherm models used in the phenol adsorption process by fly ash impregnated with Fe+ are Langmuir Isotherm (R2 = 0.9927) and Freundlich Isotherm (R2 = 0.9984), which means that the adsorption process occurs in multi-layer and mono-layers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
