Kinematics and mechanical changes with step frequency at different running speeds.

Abstract

Running at a given speed can be achieved by taking large steps at a low frequency or on the contrary by taking small steps at a high frequency. The consequences of a change in step frequency, at a fixed speed, affects the stiffness of the lower limb differently. In this study, we compared the running mechanics and kinematics at different imposed step frequencies (from 2 step s-1 to 3.6 step s-1) to understand the relationship between kinematic and kinetic parameters. Eight recreational male runners ran on a treadmill at 5 different speeds and 5 different step frequencies. The lower-limb segment motion and the ground reaction forces were recorded. Mechanical powers, general gait parameters, lower-limb movements and coordination were investigated. At low step frequencies, in order to limit the magnitude of the ground reaction force, the vertical stiffness is reduced and thus runners deviate from an elastic rebound. At high step frequencies, the stiffness is increased and the elastic rebound is optimised in its ability to absorb and restore energy during the contact phase. We studied the consequences of a change in step frequency on the bouncing mechanics of running. We showed that the lower limb stiffness and the intersegmental coordination of the lower-limb segments are affected by running step frequency rather than speed. The runner rather adapts their lower limb stiffness to match a step frequency for a given speed than the opposite.