Kinematic GNSS positioning results compared against Agisoft Metashape and Pix4dmapper results produced in the San Joaquin experimental range in Fresno County, California

Abstract

Abstract RTKLIB which is an open source Global Navigation Satellite Systems (GNSS) software has gained rapid acceptance among Surveying professionals thanks to recent developments in UAS (Unmanned Aerial System) technology. RTKLIB enables standard and precise point positioning (PPP) in real-time and post-processing modes to be performed. As such, UAS users utilize this software to analyze GNSS data collected by GNSS systems on UAS. By being versatile and free, RTKLIB is commonly used by many; however, it is not the only freely available GNSS software. There are also freely available online GNSS data processing software running on servers. These online GNSS data processing services provide data processing in static, kinematic and rapid static modes. Because UAS collect data in kinematic mode, in this study, kinematic data processing by aforementioned software (CSRS-PPP, GAPS and APPS) is analyzed. The results coming from these software are compared against the results produced by photogrammetric software (Agisoft Metashape and Pix4Dmapper). The aim of this practical project is to produce generalizable knowledge about the performance of these software. It is found out that RTKLIB and CSRS-PPP achieved cm-level precision. Yet, GAPS and APPS achieved dm-level precision both for horizontal and vertical coordinates. This study demonstrates the precision and accuracy expected from these software if they are used for kinematic GNSS data processing.