Abstract
Abstract Currently, in the Brazilian Oil and Gas scenario the execution of welding processes for stainless steel consists mostly of manual applications, rendering hard any increase in productivity and repeatability. Therefore, the automation of this step allows several advances such as more reliable results, lower costs and healthier condition for welders. With the aim of developing automation for GTAW welding of these applications, experimental tests were carried out in a 304L stainless steel pipe laid out at 5G position. The samples were orbitally welded by GTAW with dynamic wire feeding process, using a robotic manipulator in two steps of 180º in vertical down progression. The welding parameters and the stable condition obtained are discussed and the weld pool behavior during the root pass was online monitored by HDR (High Dynamic Range) videography. It was possible to reach high welding speed in the root pass, 50 cm/min in a keyhole mode. The wire dynamic movement contributed to reach great process stability and robustness for all joint passes, from root to finishing. The macrographs and x-ray analysis did not indicate discontinuities as porosity nor lack of fusion.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
