Abstract

Over the last decade, the development of ultrafast laser pulses in the mid-infrared (MIR) region has led to important breakthroughs in attosecond science and strong-field physics. However, as most such broadband MIR laser sources are near-IR pumped, the generation of high-intensity, long-wavelength MIR pulses is still a challenge, especially starting from picosecond pulses. Here we report, both experimentally and numerically, nonlinear pulse compression of sub-millijoule picosecond pulses down to sub-300 fs at 2050 nm wavelength in gas-filled Kagome-type hollow-core photonic crystal fibers for driving MIR optical parametric amplifiers. The pump laser is comprised of a compact fiber laser-seeded 2 μm chirped pulse amplification system based on a Ho:YLF crystal at 1 kHz repetition rate. Spectral broadening is studied for different experimental conditions with variations of gas pressure and incident pulse energies. The spectrally broadened 1.8 ps pulses with a Fourier-limited duration of 250 fs are compressed using an external prism-based compressor down to 285 fs and output energy of 125 μJ.

Highlights

  • In recent years, high-energy, ultrashort mid-infrared (MIR) laser sources have experienced rapid technological advancements due to their wide range of application

  • As the input pulse duration is in the ps range, the output spectrum does not support very short pulse duration; GVD from the window is of very little significance and can be neglected

  • To explore the effect of fiber core diameter on the nonlinear spectral broadening in these fibers, the previous experiments are repeated with 7-cell fiber (MFD ˆ 44 μm) of length 3 m with slightly smaller core diameter and similar experimental conditions as those for the 19-cell fiber in the presence of air and Ar pressures of 3 and 5 bar

Read more

Summary

INTRODUCTION

High-energy, ultrashort mid-infrared (MIR) laser sources have experienced rapid technological advancements due to their wide range of application. Nonlinear pulse compression in a waveguide is the most common approach for generation of femtosecond pulse durations and can be implemented in various ways—for instance, spectral broadening in noble gas-filled large-core hollow capillaries where the noble gas acts as a nonlinear medium. IC-based HC-PCFs are of advantage over both hollow capillaries and PBG-based fibers, guiding light over a large bandwidth and overcoming the damage threshold of solid-core fibers These fibers have allowed for a dramatic reduction in transmission loss and have broken records in pulse-energy handling and compression [29,30], leading to the demonstration of 1 mJ 600 fs Yb laser beam handling [30]. We further study numerically the propagation of ps pulses in these fibers and the model matches the experimental behavior of spectral evolution for different input conditions

Nonlinear Compression Setup
Kagome-Type HC-PCF Fibers
RESULTS AND DISCUSSION
NUMERICAL MODELING
SUMMARY AND OUTLOOK

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.