Abstract
This paper proposes a method for determining the boundary values of open porosity (KPO_GR) and gas permeability (KPR_GR) of porous-type carbonate reservoir rocks using the example of Tournaisian deposits of one of the oil fields of the Republic of Tatarstan. When justifying the boundary values, two databases on core studies are used: 1) on standard core studies (used mainly to calculate hydrocarbon (HC) reserves); 2) on special core studies (used for technological development projects). In the proposed method, the residual oil saturation factor is not a constant, but is taken from flow studies or calculated from core dependencies. When determining the lower limits of porosity and permeability from both databases, approximately the same boundary values were obtained: KPO_GR = 0.11 fr. un., KPR_GR = 2·10–3 μm2 and KPR_GR = 1.7·10–3 μm2, but they differ from the values, accepted by petrophysicists when calculating the reserves of considered deposit – KPO_GR = 0.09 fr. un., KPR_GR = 1·10–3 μm2. Such a difference in determining the boundary porosity can significantly affect the calculation of hydrocarbon reserves, technological calculations and field development planning.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
