Junction Capacitance Study of a-SiGe:H Solar Cells Grown at Varying RF and VHF Deposition Rates

Abstract

AbstractSignificant advances have been made in increasing the deposition rate of hydrogenated silicon germanium alloys (a-SiGe:H) using a modified VHF glow discharge deposition method while also maintaining good electronic properties important for its application in photovoltaic devices. We examine the electrical and optical properties of these alloys deposited either by RF (13.56MHz) or the modified VHF methods over deposition rates varying from 1 to 10 Å/s. The electronic properties of a series of 1.4 eV optical gap a-SiGe:H i-layers, in many cases in solar cell device configurations, were characterized. Drive-level capacitance profiling was used to determine the deep defect densities, and transient photocapacitance measurements allowed us to determine the Urbach energies. Results were obtained for both the annealed and light-soaked degraded states and these results were correlated to the cell performance parameters. In general the a-SiGe:H layers deposited using the modified VHF excitation exhibited improved electronic properties at higher growth rates than the RF deposited samples.