Abstract
The joints of the LVL elements with glued-in steel rods and metal connectors are considered as semi-rigid connection and requires taking of account compliance. In this study gives an analysis of the results of tests LVL beams with a metal connector on glued-in steel rods and solid LVL beams. Model of the destruction of rods in LVL is proposed, and allows for reduction the distance between the axis of the rods and from the axis of the rod to the edges in the cross section of the beam. This proposing is based on the analysis of the carried out investigations.
Highlights
The joints of the LVL elements with glued-in steel rods and metal connectors are considered as semi-rigid connection and requires taking of account compliance
In this study gives an analysis of the results of tests LVL beams with a metal connector on glued-in steel rods and solid LVL beams
Также очевидным и необходимым дополнением к рассмотренному виду соединения с металлической вставкой следует выполнять с двусторонней установкой гаек относительно металлической вставки, которые обеспечат включение в работу на продавливание вклееных стержней расположенных в сжатой зоне изгибаемых элементов
Summary
Bidakov A.M., candidate of technical sciences, docent (O.M. Beketov National University of Urban Economy in Kharkiv) Raspopov I.A., postgraduate., Strashko B.O., postgraduate (Kharkiv National University of Civil Engineering and Architecture). Узловые соединения ЛВЛ бруса на вклееных стержнях с металлическими стыковыми элементами являются полу-жесткими и требует учета податливости. Полу-жесткое соединение, шпоновый брус ЛВЛ (Ultralam – R), расстояние между стержнями, модель разрушения, двусторонняя фиксация узла.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have