Joint Power and 3D Trajectory Optimization for UAV-Enabled Wireless Powered Communication Networks With Obstacles

Abstract

Unmanned aerial vehicle (UAV)-enabled wireless powered communication networks (WPCNs) are promising technologies in 5G/6G wireless communications, while there are several challenges about UAV power allocation and scheduling to enhance the energy utilization efficiency, considering the existence of obstacles. In this work, we consider a UAV-enabled WPCN scenario that a UAV needs to cover the ground wireless devices (WDs). During the coverage process, the UAV needs to collect data from the WDs and charge them simultaneously. To this end, we formulate a joint-UAV power and three-dimensional (3D) trajectory optimization problem (JUPTTOP) to simultaneously increase the total number of the covered WDs, increase the time efficiency, and reduce the total flying distance of UAV so as to improve the energy utilization efficiency in the network. Due to the difficulties and complexities, we decompose it into two sub optimization problems, which are the UAV power allocation optimization problem (UPAOP) and UAV 3D trajectory optimization problem (UTTOP), respectively. Then, we propose an improved non-dominated sorting genetic algorithm-II with <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">K</i> -means initialization operator and Variable dimension mechanism (NSGA-II-KV) for solving the UPAOP. For UTTOP, we first introduce a pretreatment method, and then use an improved particle swarm optimization with Normal distribution initialization, Genetic mechanism, Differential mechanism and Pursuit operator (PSO-NGDP) to deal with this sub optimization problem. Simulation results verify the effectiveness of the proposed strategies under different scales and settings of the networks.