Joining of Cf/SiC composite to Ti alloy using composite filler materials

Abstract

Cf/SiC was successfully joined to Ti alloy with Ag–Cu–Ti–W, Ag–Cu–Ti–SiC and Ag–Cu–Ti–TiC mixed powders by some suitable brazing parameters. Microstructure and shear strengths of the preformed joint were investigated. The results showed that the W particulate and reaction products can uniformly distribute in the brazing layer of the performed joint. These composite brazing layers relaxed the thermal stress of the joint effectively. These characteristics were beneficial to the joint, which had shear strengths that were significantly higher than the optimal shear strengths of the joint brazed with pure Ag–Cu–Ti at room temperature and 500°C.