Abstract
304 stainless steel (304SS) and polyethylene terephthalate (PET) were lapped joined by laser conduction welding using a semiconductor laser with a flat-top thermal distribution. Experimental investigation and numerical simulation were conducted to analyze the weld morphology, pores distribution, interfacial microstructure, temperature field, joint strength and fracture behavior of the laser dissimilar joints. Because of the uniform thermal distribution of the laser, the decomposition of the PET base material was well controlled with pore-free joints obtaining at the welding speed over 25 mm/s. Besides, a compound layer was generated at the interface between 304SS and PET with its thickness decreased when the welding speed increased. Chemical reactions and mechanical anchoring were both observed at the interface suggesting a dual joining mechanism. The joint fracture load first increased then decreased with the increased welding speed. Besides, a ductile to brittle failure transition was clearly seen. The underlying mechanism was also discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
