Abstract
Dense compacts consisting of 40 vol.% Al 2O 3–60 vol.% 3 mol% Y 2O 3-stabilized ZrO 2 (YSZ) were joined with an interlayer of 50 vol.% Al 2O 3–50 vol.% YSZ. A joint was also made at 1200 °C with an interlayer that was 50 vol.% Al 2O 3–50 vol.% ZrO 2, in which the average particle size of both powders was ≤20 nm. The joint materials were applied by aerosol spraying, and thus the technique is suitable for commercial application. Superplastic deformation at 1200–1350 °C required ≤2 h to form fully dense joints in which minimal grain growth occurred. Virtually perfect joints were also made with various other ratios of Al 2O 3–YSZ.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.