Abstract
The purpose of this study is to application of camera posture aid using Ti-Ni superelasticitc alloy. The composition of this alloy is Ti-50.8at%Ni. This alloy showed the superelastic behavior at room temperature. The maximum load of superelastic wire is 11N by three point of bending test. The superelastic component of camera posture aid was made from sixteen Ti-Ni wires of 1.0mm in diameter and 170mm in length. The camera posture aid has a part and the part of the prop to attach to an arm. The component arranged on the arm part and prop part. The arm part was made with 3D printer. The weight of camera posture aid is 200g. Mechanical property of the component was using a load cell, Tokyo Sokki kenkyujo TCLZ-5KNA and strain gage, KYOWA ELECTRONIC INSTRUMANTS. The maximum load of the camera posture aid is 7N. The camera shake was reduced about 65.5% by camera posture aid.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
