Abstract
ABSTRACT Present study depicts the effect of isothermal holding on microstructural morphology of the cooling slope processed slurry of A380 Al alloy. Along with the primary and eutectic phase morphology, significant effect of isothermal slurry coarsening on Iron (Fe)-rich intermetallic formation is evidenced here. The study also reports the effect of adding refining (0.15 wt% Al-5Ti-1B master alloy) and modifying (0.1 wt% Al-10Sr master alloy) agents within the melt on formation sequence and percentage of Fe- and Mn-rich intermetallics within the slurry matrix. Furthermore, modified Lifshitz-Slyozov-Wagner equation is proposed here to quantify the relative influence of Ostwald ripening and coalescence, towards determining slurry microstructure, during isothermal slurry holding stage. Optimum slurry morphology, i.e. minimum size and maximum sphericity of constituent primary Al grains as well as uniform distribution of Fe, Manganese (Mn) and Copper (Cu)-rich intermetallics, is achieved for the refiner+modifier added slurry, after 7 minutes of isothermal holding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
