Abstract
This work investigated the effects of 1.0 wt. % TiO2 particles addition into Sn-Cu-Ni solder paste to the growth of the interfacial intermetallic compound (IMC) on Cu substrate after isothermal aging. Sn-Cu-Ni solder paste with TiO2 particles were mechanically mixed to fabricate the composite solder paste. The composite solder paste then reflowed in the reflow oven to form solder joint. The reflowed samples were then isothermally aged 75, 125 and 150 ° C for 24 and 240 h. It was found that the morphology of IMCs changed from scallop-shape to a more uniform planar shape in both Sn-Cu-Ni/Cu joints and Sn-Cu-Ni-TiO2 /Cu joint. Cu6Sn5 and Cu3Sn IMC were identified and grew after prolong aging time and temperature. The IMCs thickness and scallop diameter of composite solder paste were reduced and the growth of IMCs thickness after isothermal aging become slower as compared to unreinforced Sn-Cu-Ni solder paste. It is suggested that TiO2 particles have influenced the evolution and retarded the growth of interfacial IMCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
