Isotherm, kinetics, and process optimization for removal of Remazol Brilliant Blue dye from contaminated water using adsorption on acid-treated red mud

Abstract

AbstractRed mud, which is a waste product from alumina production, has been utilized after activation with concentrated sulphuric acid treatment for removal of Remazol Brilliant Blue (RBB) dye from dye-contaminated water to investigate its potential as a low-cost adsorbent. The activation has enhanced the surface area of red mud from 20.2 to 32.28 m2/g, thus enhancing its adsorption capacity. The effect of initial dye concentration, contact time, initial pH and adsorbent dosage on percentage removal of dye using concentrated sulphuric acid-treated red mud (CATRM) was investigated. The ranges of these variables for optimization were selected based on batch studies. Acidic pH favoured adsorption and 300 min contact time was found to be suitable for attainment of equilibrium under shaking conditions of 145 rpm. Langmuir isotherm model has been found to represent the equilibrium data for RBB-CATRM adsorption system better in comparison with Freundlich model. The adsorption capacity of CATRM was found to incre...