Isolation and characterization of lignin-rich particles as byproducts of bioethanol production from wheat straw to reinforce starch composite films

Abstract

Bioethanol was produced from wheat straw by a concentrated alkali pretreatment at specific conditions with a yield of 88 g ethanol per 1 kg of dry straw. To economically improve the bioethanol production process and valorize residual waste, the lignin-rich solid waste particles were isolated from the pretreatment waste liquid and characterized, and finally employed to reinforce starch-based biodegradable film. The solid waste particles were characterized by chemical analysis, dynamic light scattering (DLS), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). As bioethanol byproducts, they have mainly contained 88 wt% lignin. The average diameter of the uniform spherical shape extracted particles was determined to be 160 nm by DLS and FESEM. The presence of syringyl and guaiacyl rings were conducted by FTIR. Due to their suitable mechanical performance and thermal resistance, the lignin nanoparticles were employed as reinforcement for green biodegradable starch films. To prepare films, suspensions containing starch, glycerol, and different concentrations of lignin (0–30 wt%) were molded by the solution casting process. The starch-lignin composite films were analyzed by mechanical tensile tests, crystallinity analysis, FESEM, and thermal analysis. From the results, it was found that by adding 20 wt% lignin particles, the tensile strength and modulus of the pure starch film were increased from 4.8 and 0.9–8 and 2.4 MPa which can be partially explained due to crystallinity enhancement of film from 29 % to 48.3 %. In addition, the thermal resistance and the hydrophilic property of the composite films were enhanced due to lignin nanoparticle presence. It can be concluded that the isolation of lignin nanoparticles as waste solid in bioethanol production could be considered as a promising stage in the sustainability of second-generation products from the bioethanol production process.