Isobutane and n-butane cracking on Ni-ZSM-5 catalyst: Effect on light olefin formation

Abstract

The catalytic activity of Ni-ZSM-5 zeolites was tested in the isobutane and n-butane cracking reaction. Nickel (0.4–6 wt%) was introduced into H-ZSM-5 zeolite by dry impregnation and ionic exchange methods. Both methods of nickel introduction led to a drastic improvement both in ethylene selectivity and isobutane cracking activity when compared to pristine H-ZSM-5 zeolite. In particular, the 1% (w/w) Ni-ZSM-5 catalyst increased the catalytic activity by two orders of magnitude with respect to parent H-ZSM-5. The comparison of Ni-ZSM-5 catalyst with mixtures of pure H-ZSM-5 and nickel supported on silica suggests that the dehydrogenation products formed at the nickel sites sequentially reacted on acidic sites. In addition the proximity between nickel and acid sites favors the reaction of the products formed previously on nickel sites onto zeolite acid site. These results support a true bifunctional catalysis behavior even though no reduction was performed before catalytic evaluation.