Abstract

Nowhere is redundancy more indispensable than extended range cave diving. Training and practice in this discipline ensure divers are equipped with backup regulators, gauges, lights, and adequate breathing gas for a safe exit, emergencies, and decompression. Depending on penetration distances and depth, open circuit cave diving may require carrying more gas cylinders than can be logistically managed by the diver themselves while maintaining safe gas supply margins. Consequently, divers are forced to either stage cylinders in the cave prior to the dive or rely on resupply from support divers. Both scenarios have significant drawbacks. Due to the improved efficiency of breathing gas utilisation and other advantages, closed circuit rebreathers (CCR) have enabled extended range cave diving. With increasing depths, penetration distances, and bottom times, these divers must also plan for an increasing amount of open circuit bail-out gas in the event of CCR failure. Staged cylinders have traditionally been utilised, but this strategy has limitations due to the advanced dives needed to place them and equipment degradation due to prolonged water immersion, which can often result in cylinder and regulator corrosion with consequent leakage of contents over time. Consequently, a growing number of CCR divers are foregoing open-circuit bailout altogether by carrying an additional CCR system for bailout. Although these bailout rebreathers may facilitate further exploration and have certain advantages, the risks of diving with two complex machines remain to be clearly defined.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call