Abstract
Nowadays, miniaturization and portability are crucial characteristics that need to be considered for the development of water monitoring systems. In particular, the use of handheld technology, including microfluidics, is exponentially expanding due to its versatility, reduction of reagents and minimization of waste, fast analysis times and portability. Here, a hybrid handheld miniaturized polymer platform with a paper-based microfluidic device was developed for the simultaneous detection of nitrite and nitrate in real samples from both, fresh and seawaters. The platform contains an ionogel-based colorimetric sensor for nitrite detection and a paper-based microfluidic device for the in situ conversion of nitrate to nitrite. The platform was fully characterized in terms of its viability as a portable, cheap and quick pollutant detector at the point of need. The calibration was carried out by multivariate analysis of the color of the sensing areas obtained from a taken picture of the device. The limits of detection and quantification, for nitrite were 0.47 and 0.68 mg L−1, while for nitrate were 2.3 and 3.4 mg L−1, found to be within the limits allowed by the environmental authorities, for these two pollutants. Finally, the platform was validated with real water samples, demonstrating its potential to monitor nitrite and nitrate concentrations on-site as a first surveillance step before performing extensive analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.